Alcoa Fastening Systems -
Stoughton Operations
44 Campanelli Parkway ~ Stoughton, Massachusetts 02072
800-343-3633 / 800-343-9664
Cross section view
Klik Rivet-Nuts
Available in Steel-Zinc Plated or
Aluminum Class 2B Threads
Klik Rivet-Nuts™ can be use
in wide range of applications and are designed to provide a very efficient and
cost-effective method of placing permanent threads in thin materials. Installed from one
side,
Klik Rivet-Nuts are perfect for use in metal, fiberglass and rigid plastic previously too
thin for tapped threads. Klik Rivet-Nuts provide a neat appearance and once in place,
the internal threads are ready for a screw or bolt.
Lightweight tooling assures easy installation by the operator and
reduces costs when compared with other methods. After installation, Klik Rivet-Nuts
provide permanent, captive threads that resist high loads, do not allow loosening under
vibration and will not rotate when attached to the mating material.
Klik Rivet-Nuts with large diameter heads can be used in soft materials which inherently
offer little, if any thread strength.
The flathead design provides the most bearing surface for higher torque applications. The
larger flange extends above the material in which it is installed and provide a built-in
spacer.
Klik Rivet Nut (Flat Head) Specification
